null

Electric Carousel Definite Length Tape Dispenser Machine 6" Max. Roll Diameter

(No reviews yet) Write a Review
$839.70
SKU:
Y-Z-CUT3
Condition:
New
Shipping:
Calculated at Checkout

Product Overview

A high productivity carousel dispenser, which automatically cuts and places a pre-determined length of tape on a rotating carousel for maximum singular or multiple operator efficiency. The Y-Z-CUT 3 accepts tape widths from .125 to 1 inch (3 to 25 mm), and cuts lengths from .51 inch to 2.36 inch (13 to 60 mm). Unique sensor allows for multiple modes of operation including automatic so when the last piece of tape is removed the platen is filled again or when the button in the middle of the platen is pressed the sensor will dictate how many cut pieces of tape are applied to the platen. Easy to use side adjustments for the tape length and the tape width requires no tools. The Y-Z-CUT 3 allows up to 20 pieces of tape to be cut at the press of a button (number of cut pieces applied to the platen will be based on the width of the tape being used). Accepts most tapes and is perfect for specialty packaging, wire harnessing, cell manufacturing, and assembly work. A proven time and labor saver.

*Perfect for wire harnessing, assembly, electrical, cell manufacturing, industrial applications, and anywhere a cut piece of tape is needed.
*Cuts tapes up to 1" wide and applies the cut piece to the rotating platen for easy removal.
* Works on most types of tapes including vinyl electric tape.
* Cuts tapes from 1/8" to 1" in width and from 5/8" to 2 3/4" in length.
* Sharp guillotine cut for a clean edge to the tape.
* Length of tape and width of tape are easily adjusted using the knobs located on the side of the machine.
* Heavy Duty model for years of dependable service.
* Small table top design and fully portable for use where needed.

Specifications:
* Dimensions: 5" (126 mm) x 6" (150 mm) x 10 1/4" (258 mm)
* Weight and Speed: 4 1/4 Lbs. (1.9 Kgs) - Speed is Approximately 70 pieces per minute.
* Power: 110 Volt - 230 VAC 25 Watts
* Min. and Max. Tape Width: Minimum - 1/8" (3 mm) Maximum - 1" (25 mm)
* Min. and Max. Tape Length: Minimum - 5/8" (15 mm) Maximum - 2 3/4" (70 mm)
* Maximum Roll Diameter: 6" (152 mm)
* Core Size: Not Applicable due to exclusive cradle design

Reviews

(No reviews yet) Write a Review