4 Types of Industrial Bubble Wrap® Dispensers Professional eCommerce Shippers Use
It
is our goal to explain in depth, each type of Bubble Wrap® Dispenser
available on the market today, so that you can make an educated
purchase. If we left anything out, please click the contact us link at
the top of the page or leave a comment below. Thanks again and good
luck! For a good look at all the available models, check out our Bubble Wrap® Dispenser page. http://www.fastpack.net/bubble-wrap-dispensers/
Wall
Mounted Bubble Wrap® Dispensers are usually the most economical of all
Bubble Wrap® Dispensers, and are perfect for the user that works at a
fixed work or packing station, where it can be affixed permanently to a
wall within reach of the employees work station. Wall Mounted units
come with the needed hardware to attach to a wall. Wall Mounted Bubble Wrap® Dispensers also work with Rolls of Foam, Poly Film and other Protective
Packaging Rolls.
Wall Mounted Bubble Wrap® Dispensers come in many variations. *Widths; 12", 24", and 36" *Single
Arm, or Double Arm. If you tend to use only one type of protective
packaging, a single arm unit is probably your best option. But if you
use Foam and Bubble Wrap®, a double arm option may be your best choice.
One side for Bubble and one side for Foam. *Slide Cutter or No Cutter.
There are two main differences between each of the wall mounted Bubble Wrap® Dispensers:
1.)
One Type of dispenser acts as just a holder, no cutting tool of any
kind is on this type of unit. It is good to keep your cushioning roll
off of the ground and off of your work table. You can roll off as much
as you need then tear or cut the desired length.
2.)
Another has what is called a "Slide Cutter". This is great for non
perforated Bubble or Foam, etc. It will allow you to pull off as much
packaging material you need, lay it over the cutting bar, and slide the
"Slide Cutter" across the width of the material to make a smooth cut
edge of cushioning. The slide cutter houses a razor blade inside it.
The razor blades are easily replaced.
The
Economy Floor Bubble Wrap Dispenser with Casters and Slide Cutter, is
the most economical of all mobile dispensers. Great for the mobile
warehouse employee that does not work at just one packing station, but
moves around the warehouse and needs protective packaging wherever
he/she goes. These units also work with Bubble Wrap®, and Foam Rolls.
The Economy Floor Bubble Wrap Dispenser includes:
*These
units come in 24", 48" and 72" widths. For 36" rolls of packaging, you
can use the 48" dispenser, for a 60" roll, the 72" unit will work.
Although, check out the next unit we will discuss for a 36" or 60" roll,
the Telescoping Bubble Wrap® Dispenser.
*4
Locking Casters that allows this unit to be rolled around the warehouse
and then the casters can be locked to keep the unit from unwanted
movement.
*Slide Cutter,
will allow you to pull off as much packaging material you need, lay it
over the cutting bar, and slide the "Slide Cutter" across the width of
the material to make a smooth cut edge of cushioning. This is great for
non-perforated Bubble Wrap® or Foam. The slide cutter houses a razor
blade inside it. The razor blades are easily replaced.
*Brake
System, is activated when tension, from pulling the packaging
material, is halted. The brake provides a consistent free flow of
material without overflow.
The
Telescoping Bubble Wrap® Dispenser with Casters and Slide Cutter is
more industrial and heavy duty than the economy Dispenser. Great for
wheeling around the warehouse to multiple work and packaging stations.
These units work with Bubble Cushioning Wrap, Foam Cushioning Rolls, and Poly Rolls. Made of
Black, heavy duty solid steel tubing and are built to last.
The Telescoping Bubble Wrap® Dispenser comes with several options and features:
*Widths; 12", 24", 36"
*Single Arm, or Double Arm. If you tend to use only one
type of protective packaging, a single arm unit is probably your best
option. But if you use Foam and Bubble Wrap®, or a lot of one, a double arm option may be
your best choice. One side for Bubble and one side for Foam, or double load it with your favorite packaging material.
*4 Locking Casters that allows this unit to be rolled
around the warehouse and then the casters can be locked to keep the unit
from unwanted movement.
*Telescoping Arm can be raised or lower to accommodate the desired height.
*Brake System, is activated when tension, from pulling the packaging
material, is halted. The brake provides a consistent free flow of
material without overflow.
*Slide Cutter, is great for non-perforated Bubble Wrap® and Foam. It will allow you to pull off as much
packaging material you need, lay it over the cutting bar, and slide the
"Slide Cutter" across the width of the material to make a smooth cut
edge of cushioning. The slide cutter houses a razor blade inside it.
The razor blades are easily replaced.
or
*Tear
Tag, made for perforated Bubble Wrap® and Foam. The Tear Tag consists of a few
raised pieces that you can catch the perforation on, and pull against to
help start the tear. Not recommended for non-perforated Bubble Wrap® or
Foam.
The
Heavy Duty Bubble Wrap®, Foam Cushioning, Poly Sheeting and Indented Paper Dispenser Floor
Unit is one of the most heavy duty units available. Made of Black, heavy
duty solid steel tubing, and a wide base this model is made to hold the
largest rolls of Bubble Wrap® and Foam! This unit has locking casters, great
for ease of moving this unit around the warehouse.
The Heavy Duty Bubble Wrap®, Foam, Poly and Indented Paper Dispenser Floor Unit come with many options and features:
*Unit Widths available in 36", 48", 60", and 72"
*Single Arm Unit Only
*4 Locking Casters that allows this unit to be moved
around the warehouse and then the casters can be locked to keep the unit
from unwanted movement during use.
*Brake System, is activated when tension, from pulling the packaging
material, is halted. The brake provides a consistent free flow of
material without overflow.
*Slide Cutter, is great for non-perforated Bubble Wrap® and Foam. It will allow you to pull off as much
packaging material you need, lay it over the cutting bar, and slide the
"Slide Cutter" across the width of the material to make a smooth cut
edge of cushioning. The slide cutter houses a razor blade inside it.
The razor blades are easily replaced.
*Tear
Tag, made for perforated Bubble Wrap® and Foam. The Tear Tag consists of a few
raised pieces that you can catch the perforation on, and pull against to
help start the tear. Not recommended for non-perforated Bubble Wrap® or
Foam.
